Friday, June 10, 2016

PCB Manufacturing

I've used expresspcb in the past with good results to make boards.  It looks like we can make 4 layer boards for about $80.  Here is the link:

https://www.expresspcb.com/
Posted by at

1 comment:

  1. mmccolgaJune 12, 2016 at 9:42 AM

    This site shows a board using just the BNo055 and the xbee on a pcb
    https://forum.sparkfun.com/viewtopic.php?f=20&t=42258
    Because it's an i2c sensor, I thought an arduino was required. Wonder if it works...

    ReplyDelete

Subscribe to: Post Comments (Atom)